Two configurations, one footprint
SkyNav Standard is optimized for SWaP-C, for missions where cost is tight but performance is important. SkyNav Pro RTK uses the uBlox NEO-F9P receiver for centimetre-level RTK accuracy.
SkyNav GNSS Module
The SkyNav GNSS Module provides a complete navigation solution, based on the best sensors on the market, while being fully compatible with the PixHawk standard and pinout. based on the uBlox NEO series of receivers, paired with a high accuracy compass and optional barometer and designed for working on L1 + L5 bands, the SkyNav module family offers superior performance in GNSS contested environments. There are two versions of the SkyNav module: SkyNav Standard - Our most optimized module for SWaP-C, for missions where cost is tight but performance is important. SkyNav Pro RTK - based on the uBlox F9P RTK receiver, where extreme centimeter-level accuracy is a must, without any compromises. We know how important a quick warm-start is, so we integrated an onboard backup battery, for getting a 3D-Fix in no time.
P/N एसपी-जीपीएस-01
- L1+L5 मल्टी-बैंड GNSS
- cm-स्तरीय RTK (Pro वेरिएंट)
- Pixhawk/Cube-स्टैंडर्ड पिनआउट
- ArduPilot + PX4 समर्थित
- Regular price
- $190.00 USD
- Sale price
- $190.00 USD
- Regular price
-
- Regular price
- $190.00 USD
- Sale price
- $190.00 USD
- Regular price
-
100% NDAA अनुरूप हार्डवेयर
Questions? Email an engineer
Last updated
SkyNav GNSS Module: key capabilities
संख्याएँ जो मायने रखती हैं
27 g
द्रव्यमान
L1 + L5
GNSS बैंड
cm-स्तरीय
RTK (Pro)
UART + I2C
इंटरफ़ेस
6-pin JST-GH
कनेक्टर
फ़र्मवेयर
Pixhawk / Cube standard pinout
A 6-pin JST-GH connector on the Pixhawk / Cube standard. Plug and play when the vehicle is already wired for a compatible GPS module such as HERE2.
Compass, barometer and warm start
A dedicated onboard compass, an optional Bosch DPS368 barometer, and an onboard backup battery for a fast warm-start 3D fix.
पूर्ण दस्तावेज़ीकरण
SkyNav GNSS Module: संपूर्ण संदर्भ
Overview
The SkyNav GNSS Module provides a complete navigation solution, based on the best sensors on the market, while being fully compatible with the PixHawk standard and pinout. based on the uBlox NEO series of receivers, paired with a high accuracy compass and optional barometer and designed for working on L1 + L5 bands, the SkyNav module family offers superior performance in GNSS contested environments. There are two versions of the SkyNav module: SkyNav Standard - Our most optimized module for SWaP-C, for missions where cost is tight but performance is important. SkyNav Pro RTK - based on the uBlox F9P RTK receiver, where extreme centimeter-level accuracy is a must, without any compromises. We know how important a quick warm-start is, so we integrated an onboard backup battery, for getting a 3D-Fix in no time.
Standard vs. Pro RTK
Two configurations built on the same board, sharing the same footprint and connector. Choose the receiver, compass, and RTK capability that match your platform.
| Component | SkyNav Standard | SkyNav Pro RTK |
|---|---|---|
| GNSS receiver | uBlox NEO-F10N | uBlox NEO-F9P |
| Compass | Isentek IST8310 | PNI RM3100 |
| Barometer | Bosch DPS368 (optional) | Bosch DPS368 (optional) |
| RTK | — | Yes |
| Connector | Pixhawk / Cube standard | Pixhawk / Cube standard |
The barometer is optional on both configurations. It is useful when the flight stack is enclosed in a tight space without an air opening.
Specifications
Positioning
| GNSS bands | L1 + L5 multi-band |
|---|---|
| RTK accuracy | Centimetre-level Pro RTK configuration only. |
Sensors
| Compass | Onboard dedicated compass Part varies by configuration — see Configurations. |
|---|---|
| Barometer | Bosch DPS368 Optional on both configurations. |
Interfaces & connector
| Data interfaces | UART + I2C UART for GNSS data, I2C for compass and barometer. |
|---|---|
| Connector | 6-pin JST-GH Pixhawk / Cube standard pinout. |
Mechanical
| Mass | 27 g |
|---|
Interfaces & pinout
Designed to integrate with existing Pixhawk / Cube-standard airframes without rewiring or custom adapters.
Standard pinout
SkyNav uses the Pixhawk / Cube GPS connector standard. If your airframe is wired for a HERE2 or compatible module, SkyNav plugs in directly.
UART + I2C
Dual-interface communication: UART for GNSS data, I2C for compass and barometer. No custom drivers required on ArduPilot or PX4.
Optional barometer
The onboard Bosch DPS368 barometer can be enabled for altitude reference in enclosed airframes where no external air opening exists.
Pinout drawing is being prepared for publication. Contact engineering for the current revision.
Software & firmware
SkyNav communicates via UART + I2C and is supported on the following firmware platforms.
- ArduPilot Supported
- PX4 Supported
- INAV Supported
- BetaFlight Standard only Only the Standard configuration is currently supported. SkyNav Pro RTK support is coming soon.
Compliance & export
100% NDAA अनुरूप, उच्च गुणवत्ता वाले गैर-चीनी कंपोनेंट्स से निर्मित।
शिपिंग और अनुपालन पृष्ठ पर मूल देश, सीमा शुल्क वर्गीकरण और निर्यात स्थिति बताई गई है।
Known limitations
- BetaFlight support is configuration-dependent
- Only SkyNav Standard is supported on BetaFlight today. Pro RTK support is in progress and is not yet available.
- The barometer is an option, not a default
- The onboard Bosch DPS368 is optional on both configurations. Specify it if the flight stack is enclosed without an air opening.
FAQ
What is the difference between SkyNav Standard and Pro RTK?
The Pro RTK uses the uBlox NEO-F9P receiver (vs NEO-F10N in Standard) and adds RTK capability for centimeter-level positioning. Both share the same footprint, connector, and barometer option.
Which flight firmware does SkyNav support?
ArduPilot and PX4 are fully supported on both configurations. INAV is supported. BetaFlight currently supports the Standard version only; Pro RTK support is coming soon.
Is SkyNav compatible with my existing airframe?
SkyNav uses the Pixhawk / Cube standard GPS pinout. If your vehicle is already wired for a compatible module such as HERE2, SkyNav is plug and play with no adapter needed.
Do I need the barometer option?
The barometer is optional. It is useful when the flight stack is enclosed without an air opening, where the flight controller's internal barometer cannot get an accurate reading.
Questions about integration? किसी इंजीनियर को ईमेल करें। जवाब वही इंसान देता है जो इस बोर्ड को जानता है।
